|
Foam/Embossed Increases sound absorption performance in the most critical frequency bands by 25 to 35% when compared to other available foams. This increased effectiveness results from the pattern surface which provides a larger and densified area available for absorption. |
|
Foam/Matte Film Finish Provides a tough, puncture-resistant, non-glare textured surface which makes it suitable for use in machine tool enclosures, air ducts, quiet rooms, vehicle interiors. Textured surface in no way impairs the acoustic characteristics of the foam. |
|
Foam/Metalized Mylar Developed for use around liquids and liquid spray equipment. Reflective, impervious, wipe-clean surface protects against oils, water and many chemical substances. Reduces heat transfer through engine compartments. |
|
Foam/Perforated Vinyl Easy to die-cut and apply with pressure sensitive adhesive. The perforated vinyl surface is well suited for use in motor vehicle cabs, providing a handsome "finished" appearance. Vinyl surface in black, tan, grey or white. |
|
Foam/Barrier/Foam Combines absorption with an effective noise barrier. The absorption efficiency of the foam, together with the barrier, make this product ideal for lining engine, generator, and compressor housings. |
|
Floormat This surface is a tough, wear-resistant 1-lb. mass, plus a layer of closed cell foam Isolator. Reduces noise that comes through engine bulkhead & floors of off-highway equipment cabs. Can be washed repeatedly. |
|
Damping Sheet A thin sheet of damping compound that comes with pressure-sensitive adhesive backing to provide immediate and effective vibration damping when attached to steel as thick as 14 gauge or aluminum up to 1/4" thick. |
|
Foam Damping Sheet Consists of a thickness of embossed foam bonded to a thin sheet of high-efficiency damping compound. The damping sheet is effective over a wide frequency range. Provides a single solution to damping and absorption problems, inside equipment enclosures. |
